Main problem from Naruto: How do you connect the printer to the computer?
I have already installed everything, but every time I try to print something a file pops up and the file name always say *.xps. I don’t know what happened. Also there is something that says ” the software has been installed successfull. However, your new HP printer has not been connected to this computer.” So do you guys know how I can fix this problem?
Definitely is info on How do you connect the printer to the computer? that you could really should try to solve issues themselves. With any luck , it will help in lots of ways, to create yourself better. Who want info on How do you connect the printer to the computer? is going to be a cure later on in life.
Most practical answer:
Answer by Denver Al
It means a Print To File printer (like Microsoft XPS Document Writer, PDF creator, etc.) is set as your default printer in Windows instead of the printer you want to print to or a “print to file” port is configured for your printer, so that whenever you print you are actually trying to create files with the print information in them on your computer’s hard drive.
Hopefully you’ve installed your printer (software, interface cable, etc.) onto your computer already, which it sounds like you did. Usually when installing a printer it will ask if you want this to be your default printer, check the box or select “Yes” as needed. This should take care of it, but if you didn’t do that when you installed it then you’ll need to do this:
A simple way to check and change the default printer is to open a document you wish to print, go to the menu bar at top and click on “File”, move down the pop-up window to “Print”… and click on it. In the Print pop-up window find your printer in the window at top and right-click on it and then click on “Set as Default Printer” then select Print or Cancel at the bottom. Now shutdown the application you used, otherwise it may still try to use the old printer selection. Now whenever you click on the print icon it will print out on your printer instead of going to a file.
If you still have the “Save As” problem then the problem is your printer is setup for the wrong port in the properties section of the printer setup, a “print to file” port instead of a standard communication port to your printer and you’ll need to change it.
The problem is your current port setting for your installed printer is set to “FILE: Print to File” and as such is printing the document to a file on your hard drive instead of to the port that your printer is actually connected to. Scroll through the list of available ports to find the port that your printer is connected to (probably USB {may be named like DOT something} or LPT1 or whatever you have) and check the box next to it and click the OK button at the bottom of the window – that should fix your problem.
For XP:
Go to “Start”, select “Settings” then “Printers and Faxes”
Right click on your printer and select “Properties”
Click on your “Ports” tab (then see below)
For Vista:
Click the Start button, then Control Panel, now Hardware and Sound, and then click on Printers.
Right click on your printer and select “Properties”
Click on your “Ports” tab (then see below)
Windows 7:
1. Click Start (orb) button and then click ‘Control Panel’.
2. Then click ‘view devices and printers’ option under ‘ hardware and sound’.
3. All the available printers will be listed under ‘printer and faxes’. Right click on specific printer and then click on ‘set as default printer’.
Do know much better?
Leave your own private answer within a comments!
Printer Decay
Pic via Printer Decay
I’ve had a few funny looks recently as I’ve been collecting this printer spool which find itself spread around uni. There’s an ancient printer in particular up on the 5th floor, which is rather temperamental. Every so often it will pump out a sheet of this code. I presume its the HEX or ASCII of the image it was supposed to print, but it produces some really nice looking graphics.
As interesting as it is, its not ideal the day before a hand-in…
How do you connect the printer to the computer?